Amanda S Miller, 51108 Hardwood Ln, Fredericksburg, VA 22408

8328381, Dec 11, 2012

Feb 25, 2009

12/379585

Eva J. Dixon - Columbia MD, US
Daniel L. Krout - Abingdon MD, US
Robert G. Kusmierski - York PA, US
Stephen P. Osborne - Baltimore MD, US
Amanda Miller - Joppa MD, US
Jeff Delcamp - Lutherville MD, US
Corey G. Robertson - Felton PA, US

Black & Decker Inc. - Newark DE

B25B 23/18

362119, 362109, 362120

A power tool including a end effector rotatable with respect to the housing, a collar rotatable with respect to the housing, a printed circuit board (PCB) rotatably fixed with respect to the housing, and a light element operatively connected to the PCB and adjacent to the end effector and in a recess of the collar and located to illuminate a workpiece machined by the power tool. A method of providing light for a workpiece being machined by a power tool including locating lighting elements around a spindle of a power tool, aligning the lighting elements to shine light on a workpiece being machined by the power tool, operatively connecting the lighting elements to a PCB, containing and supporting the PCB with a guide, supporting wires configured to provide power to the PCB with the guide, locating the lighting elements, PCB and guide in a rotatable collar, and preventing the lighting elements, PCB and guide from rotating when the collar rotates.

2007018, Aug 9, 2007

Jan 29, 2007

11/698813

Benjamin S. Umansky - Fairfax VA, US
Arthur P. Werner - Alexandria VA, US
Amanda K. Miller - Fairfax VA, US
Tomas R. Melli - Haymarket VA, US
Christopher M. Dean - Chantilly VA, US
Niveen S. Ismail - Yardley PA, US
Garland B. Brignac - Clinton LA, US

ExxonMobil Research and Engineering Company - Annandale NJ

C07C 2/02
B01J 8/04

585517, 422190

A process unit for the zeolite-catalyzed conversion of light refinery olefins from an FCC unit such as ethylene, propylene, and butylene to gasoline boiling range motor fuels comprises at least two sequential, serially connected reactors connected in parallel to a fractionation section with at one or two fractionators for separating the reactor effluents into product fraction with an optional recycle stream or streams. The configurations according to this scheme allow the adjustment of reactor temperature and/or pressure and/or space velocity to be based on the reactivities of the olefin compounds present in the LPG streams so that the gasoline produced in each reactor will be separated immediately, to reduce over-polymerization of the gasoline in the low severity reactor and to ensure that gasoline formed in the low severity reactor will not be sent to the higher severity reactor e.g. with a higher reactor temperature, where excessive polymerization to undesirable higher molecular with products may take place.

2008002, Feb 7, 2008

Jun 19, 2007

11/812484

Benjamin S. Umansky - Fairfax VA, US
Ajit B. Dandekar - Bridgewater NJ, US
Tomas R. Melli - Haymarket VA, US
Amanda K. Miller - Rancho Palos Verdes CA, US
Ronald D. McGihon - Chantilly VA, US

ExxonMobil Research and Engineering Company - Annandale NJ

C10G 35/04
B01J 38/04

208134, 502 34

A method of rejuvenating a deactivated molecular sieve catalyst, deactivated by use in an olefin oligomerization or aromatics alkylation process, which method comprises contacting the deactivated catalyst with a stream of rejuvenation gas comprising a hydrocarbon product fraction from the process at an elevated temperature and pressure for a time sufficient to effect an increase in catalytic activity of the deactivated catalyst.

2013000, Jan 3, 2013

Sep 14, 2012

13/616686

Eva J. Dixon - Columbia MD, US
Daniel L. Krout - Abungdon MD, US
Robert G. Kusmierski - York PA, US
Stephen P. Osborne - Baltimore MD, US
Amanda Miller - Joppa MD, US
Jeffrey Delcamp - Baltimore MD, US
Corey G. Robertson - Felton PA, US

BLACK & DECKER INC. - Newark DE

B25F 5/00
B25B 29/00

362119

A power tool including a end effector rotatable with respect to the housing, a collar rotatable with respect to the housing, a printed circuit board (PCB) rotatably fixed with respect to the housing, and a light element operatively connected to the PCB and adjacent to the end effector and in a recess of the collar and located to illuminate a workpiece machined by the power tool. A method of providing light for a workpiece being machined by a power tool including locating lighting elements around a spindle of a power tool, aligning the lighting elements to shine light on a workpiece being machined by the power tool, operatively connecting the lighting elements to a PCB, containing and supporting the PCB with a guide, supporting wires configured to provide power to the PCB with the guide, locating the lighting elements, PCB and guide in a rotatable collar, and preventing the lighting elements, PCB and guide from rotating when the collar rotates.